Analysis Of Five Common Misunderstandings in The Use Of Washing Machines

The washing machine is one of the indispensable home appliances for modern people, which saves time and effort. However, when using the washing machine, some people may not pay attention to some points, that is, to put the clothes that need to be washed inside, which is definitely wrong. Because if the washing machine is not used in the right way, the clothes can be more dirty than before you washed! Tecoo will share with you the common misunderstandings of washing machine use, and see if you have been recruited?

1. The washing machine is not clean

Nowadays, most people may like to wash their clothes in the washing machine in order to save effort, but many people may rarely clean the washing machine itself. The current washing machine, whether it is a drum or a pulsator, uses an inner and outer two-layer structure, which is divided into an inner cylinder and an outer cylinder. The inner cylinder is the part that is in direct contact with the clothes, which we can see when we open the door of the washing machine normally. There are a large number of holes in the inner cylinder, which are used for drying and drainage of the washing machine. The outer tub is completely sealed, covering the outside of the inner tub and acting as a container to ensure that the water in the washing tub will not enter the structure of the washing machine. In order to facilitate drainage and drying, the inner cylinder will be covered with a large number of holes on its surface. In order to ensure the overall structural strength, the outer cylinder also uses a large number of uneven reinforcing rib structures, which makes the structure relatively complex. Therefore, when the drum washing machine is washing clothes, the sewage with impurities such as detergent, clothing fluff, stains, etc. will flow freely between the inner and outer barrels, and these complex structures may cause the sewage to be unable to completely remove the inner barrel. When the number of times of cleaning accumulates to a certain extent, the stains in the sewage will adhere to the outer wall of the inner cylinder, so the accumulation of stains will affect the subsequent cleaning of the clothes, making the clothes difficult to clean, and may also lead to more washing. dirty. The same is true of top-load washing machines.

Suggestion: We can often let the washing machine run the self-cleaning function, or use washing machine detergent frequently to minimize the long-term accumulation of stains in the washing machine; increase the water temperature when washing clothes, or add disinfectant when washing clothes , reducing the contamination of our clothes by bacteria in the water.

2. Clothes are accumulated to a certain extent for washing

Some people may be in the habit of putting clothes in the washing machine after they have accumulated to a certain extent, and their outerwear, underwear or socks are all mixed together and not cleaned separately. This can also lead to more dirty clothes, especially for underwear. Moreover, in the process of accumulation of clothes, after a certain period of time, the sweat residue on the clothes surface will easily lead to mold. If other clothes are washed together, the pollution area will be further expanded. And the coat exposed to dust also has countless bacteria, including some powerful pathogenic bacteria, such as Staphylococcus aureus, hemolytic streptococcus and so on. Therefore, when soaking and washing clothes, be sure to wash underwear and outerwear separately.

Suggestion: The amount of laundry in each wash accounts for at most about 70% of the inner drum volume of the washing machine. Underwear is best washed by hand, if using a washing machine, it should be placed separately and washed with warm water. In addition, you may wish to pour disinfectant or bleaching powder into the washing machine and let it idle for 10 minutes, once a week, it can also play a role in sterilization.

3. Soak overnight and then wash

Many people like to soak clothes for a long time before washing. They think that the longer the soaking time, the cleaner they will be. However, the fact is the opposite. If the soaking time is too long, the chemicals in the laundry detergent and the stains in the clothes are more easily decomposed, giving off an odor and time. Over time, it will get into the fibers of clothes, causing the clothes to fade and age.

Suggestion: Soak dirty clothes for 15 minutes. Even heavy clothes should not soak for more than 30 minutes.

4. The more washing powder or liquid detergent you put in, the better the effect.

Many people think that the more washing powder or liquid detergent you put in, the cleaner your clothes will be. In fact, this is a wrong concept. Because when the amount of detergent in the water is saturated, the excess detergent does not increase the cleaning power. To use detergent efficiently and economically, it is necessary to use the appropriate amount according to the amount of water used in laundry.

Suggestion: firstly add half the amount according to the instructions of the laundry detergent, if there is less foam, then add it gradually.

5. The zipper is not pulled well, and the button is not unfastened

The "teeth" of the metal zipper can bite into other clothing, scratching or scratching. At the same time, it will also damage the inner wall of the washing machine; if the button is not unfastened, the button is more likely to fall off and the button hole is deformed.

Suggestion: zip the clothes before washing, and check whether the buttons of the clothes are all unbuttoned.

As a professional washing machine control board electronic manufacturing service company, Tecoo has a team with more than 20 years of experience, which can provide a one-stop electronic contract manufacturing solution for your product project.