What Are The Characteristics Of PCBA Assembly Processing Of Electronic Products?
The assembly of electronic equipment is electrically connected to the circuit of electronic components supported by a printed circuit board. In terms of structure, it is the metal hardware and model shell that make up the product, and is installed in a certain order from inside to outside by fastening parts or other methods.
PCBA assembly, the main features of finished product assembly and processing are:
1,The assembly work is composed of a variety of basic technologies. Such as component selection and lead forming technology, wire processing technology, welding technology, plug-in technology, patch technology, installation technology, quality inspection technology, etc.
2,The quality of assembly operations is difficult to perform quantitative analysis in many cases. If the welding quality is good or bad, it is usually judged by visual inspection, and the assembly quality of dials, knobs, etc. is mostly judged by feel. Therefore, it is very necessary to master the correct installation operation method.
3,The personnel who carry out PCBA and finished product assembly work must be strictly trained and selected, and only after the training and assessment, can they go to work, otherwise, due to lack of knowledge and low technical level, mistakes in the assembly process may produce defective products, and Once mixed with defective products, it is impossible to be 100% checked, and the product quality cannot be guaranteed.