What Are The Packaging Requirements For PCBA Shipments?

Publish Time: January 05,2019

Before the PCBA leaves the factory, special PCBA packaging is required to prevent damage during transportation and to ensure that the final PCBA board delivered to the customer is intact. Next, I would like to talk to you about some requirements for PCBA shipping packaging.

electronic manufacturing service provider

1. Moisture requirements

Before packaging, the surface of the PCBA should be cleaned and dried, and the three-proof paint should be sprayed (the three-proof paint with moisture-proof, dust-proof and anti-oxidation functions can effectively prolong the storage time). The packaging site is clean, and the temperature and humidity comply with the relevant PCBA regulations.

2. Anti-static packaging

For a long time, static electricity has been the killer of electronic components (especially chips) in PCBA boards. Anti-static bags can protect electro-sensitive components from potential electrostatic hazards to a large extent. In PCBA packaging, anti-static packaging must be carried out to prevent electronic components from being damaged.

Antistatic packaging materials are: bubble bags, pearl cotton, electrostatic bags and vacuum bags.

Requirements for placing anti-static bags:Try to keep one of the components close to each other, no more than 2 PCBAs.

3. Shockproof packaging

Put the packaged PCBA board into a box with anti-static effect, place it vertically, stack no more than two layers upward, and add a partition in the middle to keep it fixed to prevent shaking.

After the PCBA packaging is completed, appropriate labels such as light, upward, and moisture-proof should be printed on the outside of the packaging box. It will also put the customer company name + product model + quantity + number of boxes (this depends on the customer's requirements)

TecooEMS is a professional electronics manufacturing service provider offering design, manufacturing, testing, supply chain and product management services. Has rich experience in product development and integrated manufacturing capabilities. If you have needs in this regard, welcome to consult.